GET Smart with GET Electronics

 GET Electronics - Hawkes Bay - NEW ZEALAND

Zebra 105 Se Features

Features

  • Thin film printhead with Energy Control

  • Thermal transfer or direct thermal printing:

  • standard 203 dots/inch (8 dots/mm);
  • optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm) resolution
  • Maximum print width: 4.09"(104mm)

Media Dimensions

  • Minimum label width: 0.79" (20mm)

  • Maximum label width: 4.52" (115mm)
  • Minimum label length: 0.5" (12mm) in rewind and peel modes, 0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode
  • Maximum print length:
  • 16.0" (406mm) 300dpi
  • (w/std. mem.) 12.0" (304mm) 203dpi
  • (w/std. mem.) 22.0" (558mm) 152dpi
  • Total thickness (label and liner): 0.003" (0.076mm) to 0.012" (0.304mm)
  • Maximum label roll diameter(OD): 8.0" (203mm)
  • Media core inside diameter: 3.0" (76mm)
  • Standard transmissive media sensing (label gap/notch)Ribbons

  • Maximum outside diameter: 3.2" (81mm)

  • Ribbon core inside diameter: 1.0" (25.4mm)
  • Width range: 0.79" (20mm) to 5.31" (134.8mm)

Print Speeds

  • Programmable constant printing speeds of 2" (51mm), 3" (76mm), 4" (102mm), 5" (127mm) and 6" (152mm) per second

  • Speeds with optional 300dpi printhead are 2.4" (61mm), 3" (76mm) and 4" (102mm) per second

Printer Programming Options

  • ZPL II or ZPL (selectable through software)

  • Zebra printer driver for Windows operating system
  • BAR-ONE Windows-based WYSIWYG on-screen label design application software
  • PC-470 print controller with keyboard and display for stand-alone applications

Fonts

  • 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed)

  • IBM Code Page 850 International Characters
  • Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts in standard, bold, italic and bold italic
  • Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers character sets

Bar Codes/Symbologies Code 11

  • UPC-A, UPC-E

  • Industrial 2 of 5
  • Code 39
  • EAN-8, EAN-13
  • LOGMARS
  • Code 93
  • Plessey
  • Postnet
  • Code 128 with subsets A/B/C and UCC Case Codes
  • Interleaved 2 of 5
  • EAN and UPC with 2 or 5 digit supplements
  • Codabar
  • Standard 2 of 5
  • MSI
  • ISBT 128

2-D Symbologies

  • CODABLOCK PDF417 Code 49

  • Maxi Code
  • Datamatrix QR Code

Electronics

32-bit microprocessor

Electrical

Switch selectable 115 VAC +15/-20%,

5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz)

Communications Interface

Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD rate, parity, data bits, XON-OFF/DTR protocol

Physical

  • Height: 15.4" (391mm)

  • Width: 10.5" (267mm)
  • Depth: 18.9" (480mm)
  • Weight without options: 43 lbs (19.5kg)

Environment

  • Operating temperature: 41°F (5°C) to 104°F (40°C)

  • Operating humidity 20-85% non-condensing
  • Storage/transportation: -40°F (-40°C) to 158°F (70°C), 20% to 85% non-condensing R.H.

Options

  • Label peel and liner rewind (for print-and-apply)

  • Rewind (full label roll is rewound internally)
  • Memory (standard 0.5 MB DRAM expand-able to 1MBstandard with 300dpi option)
  • High-performance cutter cuts full-width media, under software control (not compatible with rewind and peel options)
  • Printhead 152.4 dots-per-inch (6 dots/mm) resolution
  • Printhead 300 dots-per-inch (12 dots/mm) resolution
  • Internal Fan-fold Media Supply Bin (not compatible with internal rewind or peel options)
  • Additional scalable and smooth bit-mapped fonts
  • Reflective (black mark) media sensor (in addition to standard transmissive sensor), switch selectable
  • BAR-ONE label design software

Specifications subject to change without notice.

[BACK]